Custom Sambo Base Layer Tops
Custom sambo base layer tops are manufactured by ZipaSports in Sialkot, Pakistan, with an MOQ of 20-25 pieces per design and bulk production in 15-25 business days. Worn under the kurtka in training or alone for conditioning work, they give clubs and combat brands a close-fitting layer that carries full club graphics without bunching under grips.
The fabric options are 180-220 GSM polyester-spandex or nylon-spandex with 4-way stretch, assembled with flatlock seams so nothing rubs during gripping and throwing. Dye-sublimation prints club colours, crests and sponsor marks into the fibre, where they survive mat friction and constant washing. Supply artwork and a size breakdown; a free digital mockup is produced within 24 hours.
- MOQ 20–25 pcs per design
- Free 24h digital mockup
- Production 15–25 business days
- Ships worldwide from Sialkot
- Private-label ready
Base Layer Tops Specifications & Fabric Options
| Fabric options | 180-220 GSM polyester-spandex or nylon-spandex, 4-way stretch |
|---|---|
| Seams | Flatlock construction against skin chafe |
| Sleeves | Long-sleeve, short-sleeve or sleeveless |
| Decoration | Full dye-sublimation; graphics stretch without cracking |
| Sizes | Adult XS-5XL, women's XS-4XL, youth sizes |
| Minimum order | 20-25 pieces per design; lower on request; no limit for sportswear brands |
| Sampling | Free digital mockup in 24 hours; physical sample 5-7 days at cost, credited on bulk order |
| Production time | 15-25 business days after design approval; express 7-12 days |
| Shipping | Worldwide - DHL/FedEx/UPS express 5-10 days; sea freight for bulk |
📏 Need measurements? See the sportswear size chart guide — or send your own size chart and we cut to it.
Base Layer Tops Customisation Options
- Red and blue versions to match competition kurtkas
- All-over sublimated club designs
- Crest on chest with sponsor marks on sleeves
- Long-sleeve, short-sleeve and sleeveless cuts
- Athlete names across the shoulders
- Pantone-matched colour panels
- Printed inside-neck branding for private label
- Fully custom patterns & made-to-spec designs — send a tech pack, sketch or sample
Base Layer Tops — Frequently Asked Questions
What is the minimum order for custom sambo base layer tops?
20-25 pieces per design. Lower quantities are possible on request, and there is no MOQ limit for sportswear brands and companies.
What fabric is used for sambo base layers?
180-220 GSM polyester-spandex or nylon-spandex with 4-way stretch and flatlock seams. The fabric compresses lightly, wicks sweat and slides cleanly under a kurtka.
Will the printed design wear off under kurtka friction?
No. Sublimation dyes the design into the polyester fibre rather than sitting on the surface, so lapel grips, mat contact and washing do not fade, crack or peel it.
How quickly can base layers be produced?
Standard production is 15-25 business days after design approval; express production takes 7-12 days at additional cost. Worldwide express delivery adds 5-10 days.
Can I test one before ordering for the club?
Yes. You get a free digital mockup within 24 hours, then a physical sample in 5-7 days at sample cost. The sample cost is credited against your bulk order.
How much do custom base layer tops cost?
Pricing for custom base layer tops depends on fabric choice, order quantity, decoration and destination, so every order is quoted individually. Send your design and quantity on WhatsApp (+92 300 7019281) for a same-day quote and a free digital mockup within 24 hours.
Related resources
More Sambo products
